It is used for the crushing and plastic of soft, medium hard or super hard, and it can help to recover the investment in 4-5 monthes.
CONTACT USComparing with similar domestic products, VSI new-type sand maker has higher output, good grain shape and low use costs. This machine is especially applicable to provide superior-quality gravel aggregate for high-rise buildings, highway (railway) construction, municipal engineering, large water conservancy facilities, concrete mixing plants, etc.
1.Low consumption of wearing parts The best crushing cavity angle design, reduce the friction between material and wear-resistant parts, the operating cost is 30% lower than traditional equipment.
2. Large capacity, high yield, excellent product grain Compared with traditional equipment under the same power, the VSI yield increased by 30% and runs stable. Products are cubes with good grain shape, reasonable gradation, fineness modulus is adjustable, especially suitable for artificial sand and stone shaping.
VSI series high-efficiency vertical shaft impact crusher (new sand maker) is an international advanced level, high-efficiency sand maker that researched and developed after a number of technical optimization, based on our introduction of German advanced technology, combining with domestic actual sand making situation. Pay attention to environmental protection Sand-making equipment works with little noise and no pollution. Unique air self-circulatory system greatly reduces the external exhaust air volume, reduces dust, which is conducive to environmental protection. In addition, the VSI sand maker is reserved and suitable for installation of various specifications of dust removal equipment.
A super-large-scaled modern green industrial workshop 260000 square meters, large and medium-sized gold processing, maohan, assembly equipment more than 600 sets.
CONTACT US
| Model | VSI 7611 | VSI 8518 | VSI 9526 | VSI 1140 | VSI 1145 | VSI 1150 | |
| Capacity (t/h) |
Feed both at center and sides | 80-180 | 140-260 | 200-380 | 300-520 | 350-610 | 360-650 |
| Feed at center | 40-90 | 70-130 | 100-190 | 160-260 | 180-355 | 190-365 | |
| Max.feeding size （mm） |
Soft material | 35 | 40 | 45 | 50 | 50 | 50 |
| Hard material | 30 | 35 | 40 | 40 | 45 | 45 | |
| Rotation speed（r/min） | 1700-1890 | 1520-1690 | 1360-1510 | 1150-1300 | 1150-1300 | 1150-1300 | |
| Motor power（kw） | 4P 110 | 4P 180 | 4P 264 | 4P 400 | 4P 440 | 4P 500 | |
| Overall dimension（L×W×H）（mm） | 4100×2250×2300 | 4160×2320×2900 | 4560×2450×2830 | 5500×2700×3100 | 5500×2700×3100 | 5500×2700×3100 | |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.
| Model | Capacity(t/h) | |
| Feed both at center and sides | Feed at center | |
| VSI 7611 | 80-180 | 40-90 |
| VSI 8518 | 140-260 | 70-130 |
| VSI 9526 | 200-380 | 100-190 |
| VSI 1140 | 300-520 | 160-260 |
| VSI 1145 | 350-610 | 180-355 |
| VSI 1150 | 360-650 | 190-365 |
Note:processing Capacity May Vary With Different Materials And Feeding Sizes.